We have the same issue no matter what device is connected to the dock and are having to manaully udpate the firmware on all of them as remote upgrade is to problemmatic.
↧
Re: Black screen - Ultraslim docking station with 1040 g1 - displayport
↧
Graphics Card for 8200 Elite Small Form Factor PC that allows vpro remote access?
I'm looking to add a graphics card in my 8200 Elite SFF. What would the best cards that are compatible? I need to be able to access the PC remotely in the bios and boot menu prior to the operating system loading. I'm not totally sure if adding a graphics card would interfere with the ability to access the PC remotely. Thanks!
↧
↧
ProLiant ml370 g6/dl370 g6 606200-001
Good Morning.
I would like to know if it is possible that this board works with a power supply of a 800W PC. I have no experience with servers and I am afraid that there are additional control connections that do not have and can not be started. The idea is to buy this second hand plate.
ProLiant ml370 g6 / dl370 g6 606200-001
I am not clear if they are exclusive / special power supplies by additional controls.
I would like to do with such a system, respecting processor configurations, memory .., but the question is whether it will boot with the aforementioned source and placed in a large enough PC box.
Thank you for your time in advance.
A greeting.
Angel
↧
Hp xw4600 Workstation beeps twice and does not boot
I have a HP xw4600 workstation. When I turn it on, the fans turn on momentarily before the CPU beeps twice, the fans stop and the pc fails to boot. Can anyone tell me what's the problem?
↧
In the 8200 Elite Small Form Factor PC remote access stops working when you put in a graphics card
Is there a setting in the bios that's disabling remote access? If there is such a setting where is it and what do I need to change to have remote access working again? Thanks!
↧
↧
What are the settings in 8200 Elite SFF bios that prevent remote access with a graphics card?
Are there any settings in the bios of 8200 Elite Small Form Factor that disable remote access when an external graphics card is inserted? Thanks!
↧
Is the WH340AA rackmount kit compatable with the HP Z440 workstation
Can anyone tell me if the WH340AA adjustable fixed rail kit will work with the HP Z440 workstations or is there another part number I should be using? I have used this product with the HP Z420 workstation.
↧
z600 will not wake from sleep, fans run at max speed and lights flash
Hi,
My z600 has recently started to refuse to wake from sleep, the fans start up as usual and then ramp up to max speed after a few seconds. Both lights on front of the desktop blink.
I have no issues booting normally or using it normally (lots of 3D renderering with CPU+GPU).
The only recent change has been a downgrade from Windows 10 to Windows 7.
Are there any error codes that can be read or troubleshooted?
Thanks
Oli
↧
Need help
Hello,
Will HP Z840 workstation (T4P07UT) accept Radeon Vega Frontier Edition graphics card, theoretically or practically?
I do not know much about size, connection, and drivers. HP does not list the card.
Thank you.
↧
↧
hp proliant dl 380 6G server Raid 5
i am very fasted this issue bechase my server hp proliant dl380 6g raid 5 alreday configure bust some time after fail my one sas hard disk but not a work replace this drive how to solve this open operation system without any data loss . plz any body just right ans.
↧
Elite 8300 has red flashing power led and 4 beeps with no POST
Just replaced PSU with a Corsair 700W modXstream-pro because my Gigabyte nVidia GEForce GTX 750 TI is one of the rare GTX 750 cards that absolutely need a power supply by way of a 6pin socket on the top of the card. My previous card (Radeon HD 6450) went wrong and I got nothing on my monitor at all. Once I removed the Radeon card I got my POST beep confirming to me (at least) my graphics card (or, gulp, my graphics card slot in my motherboard) was the problem.
Replacing the PSU required me purchasing a power cable (AXT 24pin to motherboard 2-port 6pin adapter power supply cable for HP Z220 & I NO Elite 8xxx) which came with a a power converter for the purple cable reducing 12v to 5v (or vice versa!). It seemed very easy actually despite my initial trepidation and the modular cable system made powering the new GTX 750 TI easy enough for a toddler (or even me) to do!
Feeling confident my problems were now resolved I switched on. Ugh, nothing on monitor at all, no POST completion but a sickening red flashing power LED above my PC's power button with 4 beeps going off all the time. Depressing the power button (and keeping it depressed) gets both my power and HDD light green with no beeps but as soon as I release the power button I get back my 4 beeps and red lashing power light (with no HDD light).
I have no idea what is going to on now or what I should do (other than to chuck this blasted thing into the rubbish and go and buy a new one - or maybe even build my own since I have quite a few components already including a new 250GB SDD, a new 500GB HDD, my PSU and my graphics card!!!!).
Can anyone throw me any sort of a life line?
↧
RAID controllers, maximum capacity of each disk
Hi,
I am wondering if the p800 RAID controller can supports disk up to 3TB. I need to update the firmware? Or it is possible use it without the upgrade? And something less important, can I update a p400 controller RAID for use that size of disks? Thanks for your answers.
Regards
↧
Power support
Hi guys i need a little help!!
I have hp z400 with w3520 processor and i have gtx690 gpu and the supply of this machine is not supporting this card so should i have to attach a external power for this card to play it on this pc
I have hp z400 with w3520 processor and i have gtx690 gpu and the supply of this machine is not supporting this card so should i have to attach a external power for this card to play it on this pc
↧
↧
VNC doesnt work on last HP image in service mode
Hello
I use thinclient t520. I download last HP Win10 image 14WWETCJ601_ABA_030717 (win10 ltsb 2016) and after deploy i cant use VNC in service mode. If i start VNC in user mode - all fine. When i deploy Win10 ltsb 2015 image - all fine without problems.
Can anyone know why on last image VNC doesnt work in service mode???
↧
McAfee Endpoint Encryption Fatal Error: [0xEE00000E] Invalid timezon bias
Hello everybody,
My ProBook 6570b does not boot from one day to the other.
Instead, I get a cryptic error message:
McAfee Endpoint Encryption Fatal Error: [0xEE00000E] Invalid timezon bias.
I was not aware that I had a McAfee product, I have never istalled a McAfee Product on my Probook.
Something googled and get the information that this is delivered by
HP with the Notebook. This is probably a known Issue but with McAfee you get only support
if there is a company Gold Support contract. I beg your pardon! I use the ProBook
private and I bought it privately.
With the HP support itself I'm not really really advanced yet, so my help
here in the HP customer forum for a solution, how I can fix the problem as
possible without losing my data.
Here is a photo of the error message.
↧
HP Thinclient T5740 dual monitors only cloned output DPort - VGA
Hi,
I have a HP Thinclient T5740 with 1.04 bios and HP ThinPro linux image.
The issue is that when I have two monitors connected the same image appears on both of them and I need separate displays.
This setting is from the POST and BIOS. The same image appears on VGA and DPort output.
Is there a setting to have two separate displays (Extended desktop) ?
I've tried a lot of settings but I do not see in bios any setting that will allow something to be changed.
The video chip is GL40 and from SO i change the setting but does not apply.
Any help is appreciated.
Thanks
↧
HP T520 suddenly shuts down computer
We have a little big problem with the newer HP T520 clients. Both W10 and W7 versions with the newest HP Easy Shell software on it.
I setup a kiosk mode with a webpage to internal citrix storefront page.
User can log on and load a desktop envorinment and work on it. But sometimes, and it's not every day, but also sometimes multiple times a day to make it more confusing the users seeing that their thin client desktop going to logoff and the system shuts down after that.
And it happens on every moment, in screensaver mode or while typing.
The citrix desktop session is then still alive / disconnected, and most user will get their session back after powering the thin client again.
I am really confused about this. I installed newest bios and driver pack, and HP Easy Shell software but this didn't help.
↧
↧
HPDM can't capture image from T630
Recently purchased a T630 W10 thin client. Updated to the latest 1607 release. Trying to capture the image with HPDM is returning a 1083392 error. Upon futher investagation the T630 wpeinit.log log shows E"RROR QueryAdapterStatus: no adapters found."
Any ideas? I'm also using the latest HPDM 4.7 SP7.
↧
HPDM 4.7 SP7 can't capture image from T630 W10
Recently purchased a T630 W10 thin client. Updated to the latest 1607 release. Trying to capture the image with HPDM is returning a 1083392 error. Upon futher investagation the T630 wpeinit.log log shows E"RROR QueryAdapterStatus: no adapters found."
Any ideas? I'm also using the latest HPDM 4.7 SP7.
Also, whats up with this forum? I've posted two questions and they never show up. As if they never existed. Had to create a new account.
↧
EliteDesk 800 G3 - GTX 1080 specs
My organization wants to train employees with VR and we recently purchased the newly available HP EliteDesk 800 G3 which has the RX480 card. We noticed that it uses a custom design manufactured by HP which is only 7" in length whereas the reference design is about 9.8". We are now planning to purchase some more units of EliteDesk 800 G3 but the ones that come with the GTX 1080 graphics card. My IT team wants to know if the 1080 card being supplied is also a custom design by HP or if it's the founders edition design which is 10.5". Also, in case it is the FE 10.5", can I have the dimensions of the chassis as I could not find them on the website, a link to the same would also help. Size considerations are important for us so these details are urgent to finalize our plan to purchase.
↧