I installed Windows 10 on this model desktop and was missing this driver, and this is the correct one! Thank you so much!
↧
Windows 10 PCI Serial Port driver for HP 6200 Pro SFF
↧
Base System Device Errors in Device Manager on Windows 10 on a Z820 after Processor and RAM Upgrade
Hi Everyone,
I am getting the following Base System Device Errors on my HP z820 after upgrading my processors and RAM.
Device PCI\VEN_8086&DEV_0E11&SUBSYS_00008086&REV_04\3&11583659&0&31 requires further installation.
Device PCI\VEN_8086&DEV_0E19&SUBSYS_00008086&REV_04\3&11583659&0&39 requires further installation.
Device PCI\VEN_8086&DEV_0E15&SUBSYS_00008086&REV_04\3&39af822d&0&35 requires further installation.
Device PCI\VEN_8086&DEV_0E1A&SUBSYS_00008086&REV_04\3&11583659&0&3A requires further installation.
Device PCI\VEN_8086&DEV_0E16&SUBSYS_00008086&REV_04\3&11583659&0&36 requires further installation.
Device PCI\VEN_8086&DEV_0E12&SUBSYS_00008086&REV_04\3&39af822d&0&32 requires further installation.
Device PCI\VEN_8086&DEV_0E1B&SUBSYS_00008086&REV_04\3&39af822d&0&3B requires further installation.
Device PCI\VEN_8086&DEV_0E14&SUBSYS_00008086&REV_04\3&39af822d&0&34 requires further installation.
Device PCI\VEN_8086&DEV_0E15&SUBSYS_00008086&REV_04\3&11583659&0&35 requires further installation.
Device PCI\VEN_8086&DEV_0E11&SUBSYS_00008086&REV_04\3&39af822d&0&31 requires further installation.
Device PCI\VEN_8086&DEV_0E19&SUBSYS_00008086&REV_04\3&39af822d&0&39 requires further installation.
Device PCI\VEN_8086&DEV_0E1A&SUBSYS_00008086&REV_04\3&39af822d&0&3A requires further installation.
Device PCI\VEN_8086&DEV_0E12&SUBSYS_00008086&REV_04\3&11583659&0&32 requires further installation.
Device PCI\VEN_8086&DEV_0E16&SUBSYS_00008086&REV_04\3&39af822d&0&36 requires further installation.
Device PCI\VEN_8086&DEV_0E1B&SUBSYS_00008086&REV_04\3&11583659&0&3B requires further installation.
Device PCI\VEN_8086&DEV_0E14&SUBSYS_00008086&REV_04\3&11583659&0&34 requires further installation.
PCI Serial Port Resource settings. The device isn't using any resources because it has a problem.
I have updated all the drivers from HP's site for the Z820 and also ran Intel's Driver & Support Assistant and it indicates that I am up to date. Ditto on HP Support Assistant.
Does anyone have any ideas on what may be causing this error?
Thank you kindly,
Scott
↧
↧
HP Z440 advance bios settings
I purchased used out of warranty service HP Z440.
As I need to improve its performance I need to overclock CPU. How can I access to those options in BIOS? I have bios M60.
i know that HP do not support Overclocking because I can damage my product but as said it’s out of warranty so any damage is my risk.
↧
Available upgrade to the heatsink/cpu fan to EliteDesk 705 G3 SFF
Hi there,
SoI just upgrade my 705 G3 SFF cpu from amd a6-9500 to the amd a12-9800! But the computer seems to run a little hot under load.
My question is are there any fans/heat sink out there that works with this rig?
Thanks,
↧
Unable to use wireless keyboard with new bought PC
I bought Eliteone 800 G4 all in one PC recently and installed it. Windows system is started but unable to use wireless keyboard, mouse. Replaced new batteries but still not able to use them. I searched all packing materials, but did not find any USB connectors for the same. So, need help in this issue.
↧
↧
HP Device Manager error
Hi there,
I'm trying to execute task from HPDM to T430 thin pc and i'm getting this error:
2019-07-22 11:50:26 [Error Details]: Capture image to the Master Repository.
Failed to upload T430_T71018SP3_W19.3 to /Repository/Images/20190722_T430_OST7X71018SP3_Workspace19.3.0hp1d_USB_OK.
Failed to execute CaptureImage task.
ErrorCode: 1071104, Error Info: ../../Task/common/MachiningTask.h@40: Failed to get image task infomation.
../../Task/common/ImageCommon.cpp@1724: Failed to get repository settings.
../../Task/common/ImageCommon.cpp@693: Failed to create file client.
./ftpclient/HttpClient.cpp@464: Failed to login XXX.XXX.XXX.XXX:443,error:code Peer certificate cannot be authenticated with given CA certificates
Can anyone help me?
Thanks!
↧
HP RP5 Retail System Model 5810 - boots slowly
HP RP5 Retail System Model 5810 - boots slowly when using on-board USB "POS data module".
System boot takes +- 5 minutes.
Updated to BIOS 00.02.43 Rev.A - problem still occurs.
Disabled USB legacy setting in BIOS - problem still occurs
Using on-board 12V USB2.
↧
CRACK SCREEN
I HAVE 2 HP PAVILLION 23.8 " ALL IN ONE DESK TOP BOTH SCREENS ( GLASS ONLY )HAVE CRACKED AND I CAN'T SEEM TO FIND A REPLACEMENT PART FOR THESE , WHY IS THIS ?
↧
need to install GTX1060/1070 in Z240 Tower Workstation
Hello,
Problem: Client claims that CAD Software SketchUp Pro 2018 is slow in daily usage. (probably due to the installed P1000)
We have 3 x Z240 Tower with this specs:
CPU: i7 7700k, RAM: 16GB DDR4,
GPU (Grafik): NVIDIA Quadro P1000 4GB
SSD
Software Manufactorer SketchUP recomends Geforce GTX 1060/1070
Is there a technical reason to use only the original HP GFX Cards? (beside warranty?)
Do you think we can use a 3rd Party GTX 1060 also From ASUS or PNY?
Do you think there will be problem in connection with Space inside the Chassis?
Do you think there will be a problem due to missing power connect between Powersupply, Mainboard oder Gfx?
https://www.videocardbenchmark.net/high_end_gpus.html
No AMD Radeon
https://www.sketchup3d.de/produkt/system-voraussetzungen/
https://www.sketchup3d.de/service/faq/#01
Thx, best regards
↧
↧
Please share the orderable motherboard part number : Serial Number : 8CC8170MV0
Please share the orderable motherboard part number for the below:
Serial Number : 8CC8170MV0
Product Number : 3LA49AA
Description : HP PAVILION ALL-IN-ONE - 24-B327C
↧
using microsoft autopilot/intune for provisioning new win10 pro PCs (hp cto pc with corporate rdy)
Hello,
has anybody experience with a.m. procedere?
do you think such hp corporate ready (cto only) windows 10 makes sense?
I know the HP FAQ for Autopilot and the PDF for corporate ready - but it seems that is not often in usage?
thx in advance!
↧
HP z420 SSD PROBLEM PLEASE HELP
PLEASE HELP I purchased the new ssd bx500 thr 2.5 inch one and got a sata cable inserted into the sata port 0 .
first i got my windows 10 on my HDD;got the ssd initiated and formatted everything is fine till i wanted to get it the new operating system to boot yhe hp z420 . any usb flash disk i attach does not want to get me the space IT DOES NOT SHOW THE SSD SPACE AT installation screen . and even countless tries like getting the sas controller driver from windows 10 then reboot it does not want to create on the space. i tried ahci only ;,ahci +raid'ide.nothing is working. i tried cloning from my hdd to ssd again got me into blinking cursor black windows screen . what do i suppose to do ?? i can get into the ssd from the hdd at inside windows of hdd but i cant do windows inside ssd . and there was times when i got the ssd and got the windows inside it but says something like controller in the bios ?????i did all the 3 ahci ahci+raid and ide. how do ppl get windows inside that ssd to boot up ?????
↧
Random power off
We have an issue with a HP 290 G1 Small Form Factor PC. At random the machine will power off completely. We have replaced the kettle lead and replaced the extension the machine plugs into. To get the machine back up and running the user has to remove the power cable, wait 5-10 seconds (I assume for all the power to discharge), reconnect the power and switch the PC back on. Somethings this has to be done several times before the PC turns on.
Does this sound like the PSU or could it be the motherboard? We're just trying to sort out the warranty with HP, but thought I would ask here just in case.
↧
↧
HP Z Turbo Drive 256GB PCIe
Hello,
I bought a HP Z Turbo Drive 256GB PCIe . There is a cable to the LED Connector on the motherboard but I can not find a LED Connector PiN on the motherboard. Is it really necessary to be connected and where to find that Connector-PIN.
Thanky you for help
↧
Z230 workstation upgraded to Window 10 N, USB's of any kind intermittently getting access denied
Hello,
I am imaging a lab of SFF Z230's with Windows 10 N. Driver packs have been updated to the latest provided by HP, however I am having issues with any external USB connections, and will get an "access denied" on the external devices. All of the external devices work on other types of laptops and desktops and will occasionally work with the imaged workstation. I have tried giving permissions in registry to the USB, specifically this path: Computer\HKEY_Local_Machine\SYSTEM\CurrentControlSet\ENUM\USB.
The permissions are given to allow "everyone" and to Include Inheritable permissions from this objects parent.
I have also made adjustments in gpedit for Removable Storage Access to allow anyone to read/write to all removable storage classes. When plugging in any USB device, an audible connection is always heard, however not always allowed. Occasionally, some USB devices will need to be safely removed from the printers and devices location because the ease of taskbar removal is not available or does not work properly. This too is an occasional occurrence as well.
↧
HP Device Manger Captur Image from T520 Thin client error 1083392
I am using the HP Device Manager 4.7 SP 7 on a Windows Server 2008 R2. When trying to capture an image from a t520 Thin Client with OS ThinPro 5.2.0 I get an error 1083392 saying "Capture Image failed" and "The HPDM does not support ThinPro5.2+ imaging". Anyone else with this problem?
↧
WCH PCI SERIAL driver
Hi,
I've updated from a Windows 7 pro to windows 10 version 1903 OS build 18362.239. I am not able to connect to the serial comport like I use to. Please advise,
Thank you for your help.
↧
↧
How do I adjust display brightness and contrast with HP Eliteone 1000 G2 AIO 27-UHD RX560?
I have HP EliteOne 1000 G2 AIO 27-UHD with Radeon RX560 Dedicated video card.
(1) How can I change the brightness?
Windows display settings does not have the brightness control bar. AMD radeon settings does not have it either. System is fully updated. If I use keyboard shortcut for brightness control, brightness OSD appears and the brightness bar shifts but the actual brightness of the display does not change at all.
(2) How can I adjust the contrast?
I can't find any way to adjust the screen contrast. Radeon software does not have it either.
(3) How can I enable "Fluid Motion" on my RX560 mobile
There is no "Video" tab in my AMD Radeon Settings software even after all updates. So I can't access AMD Fluid Motion Video to begin with. What can I do to solve this problem?
I searched Internet very hard for hours but could not find any relevant information at all. Please help.
Thank you.
↧
HP Elitedesk 8200 permanently showing red power led
Hi,
I refurbished some outdated HP Desktop computers from our business for private use and reinstalled them on Win10. On anElitedesk 8200 with I5 CPU the Power LED is now permanently red, before it was green. I already swapped the power supply, but no change. There are 2 hard disks and one DVD drive running in the machine. Everything works fine, Windows is running and there's no visual lack in performance. Do I have to worry or can I just continue using the computer ? In another thread I found permanent red LED means power supply, mainboard or cpu problem.
I also ran a diagnostic tool named HW Monitor and values seem normal to me (CPU temperature etc).
Thanks in advance for any advice and sorry for my english.
↧
Student discount
Hi
I want to know more detail about special student discount for students in Norway
↧