Quantcast
Channel: Business PCs, Workstations and Point of Sale Systems topics
Viewing all 10205 articles
Browse latest View live

HP Z800 RTX 2080 Ti - cutting out issue (full stop)

$
0
0

Hi guys

 

First post, so please be gentle.

 

I'll detail the history below*..

 

So when I fired up the 2080  Ti in the Z600, the system *sudden stopped* going into any game.

I blamed the 650W PSU.

So I bought Z800 with 850W PSU.

Same problem. sudden stop when going into games.

 

I completed the sellers tests (DDU,heaven benchmark) same result.

So I returned the card. The seller ran the card for 48h in heaven benchmark. The seller said the card ran fine.

 

So I face this dilemma.. 

 

£1000 brick I cannot use.. £1230 wasted.

or risk blowing a further £200 on the 1250w PSU.. and so risk blowing £1430 on again.. a potential brick.

 

What should I do? 😞

 

Dava

 

-------------

Notes:

*I started with a Z400 (X5650 9GB 1333mhz RAM with GTX 660) moved up to a Z600 (Dual X5650 24GB 1333mhz ECC with GTX 970) couple of years later.. was really happy. The GTX 970 was getting old for gaming so I bought a RX 480 8GB.. which all it did was micro stutter and frame lag.. bought 2 x GTX 1070 thinking I could SLI, NOPE! the Z600 doesn't SLI (certainly not normal cards) so I sold one..so far lost a ton of cash..(bought RX 480 for £230 iirc..sold for £96 + 2 x R9 280X for £48 each.. for CEX so £188 voucher and bought a 1070 from them for £275.. so extra £87).. sold 1 GTX 1070 for £200.

 

So I had enough messing around.. so I bought a 2080 Ti. In the Z600 it sudden stopped. So I bought a Z800 for £230. same problem.So the money was wasted.  Currently the card is with the seller who said he would pass it on the the manufacturer. Who IF they have a Z800 can test and if not.. It'll be sent back to me for it to have the same fault.


Help! My Hp z440 wont show anything on screen, fans turn on, but there static noise when turn on.

$
0
0

Help my workstation, HP z440, wont show anything in screen. Before that it boot it up and I could access the BIOS. I changed some settings in the BIOS.The error then was the 6 beeps and I fixed it by pressing the CMOS button for 5 seconds. Now the computer does not beep, but it does even show anything on screen (no booting or even displaying the logo of HP), it is just a black screen. Moreover, when I now power on the computer, it create static noises and it seems that motherboard does not give any external power (like mouse and keyboard wont work, but the internal fans of the computer (CPU fans and video card's fan turn on). I need help, I don't what to do to fix this.

 

My computer has 8 GB of ram, no hard drives and 700W power supply. The video card is the one that came preinstalled in the computer, 

Smart card error

$
0
0

My PC started asking me for a smart card after I put an Ethernet cable av tried changing the battery but no change please help

Looking for a heatsink compatible with xw8400

$
0
0

Greetings!

 

Looking to upgrade my old xw8400. I already got two intel Xeon x5365 processors and successfully installed them. My machine now quickly overtemps and shuts down. I've got two 398293-003 heatsinks at this moment.

 

The processors have a TDP of 150W.

 

Anyone have experience with this or can think of compatible heatsinks?

 

They're supposed to fit an LGA771 J socket and be strong enough to cool xeon x5365 processors.

 

Thanks a lot in advance!

HPE ProLiant DL380 Gen10 memories and Harddrives

$
0
0

Hi, I am trying to order some parts hard drives and memory for our server and I can't get part numbers. could you please advise.

Supply memory error

$
0
0

Changed the cartridge and still get the same error 

Above 4G Decoding on hp z820 workstation for Tesla support!

z440 workstation wont boot

$
0
0

Workstation is less than  year old.  I boot up after a weekend shutdown.  Hit power button, fan turns on, then dies down, cusror in upper left of screen.  Takes multiple time of pressing power button to start.  One time it froze on spinning dot screen.


Re: HP Pavillion Media Center m8000n drivers

$
0
0

I'd like to chime in on this thread.

Having the same issue trying to download drivers for HP EliteDesk 705 G4.

Have tried hitting the site from different computers, at different times, on different networks.

Any thoughts?

Thanks

HP Elitedesk Mini 705 g1 BIOS update / support for Carriozo APU A8-7680

$
0
0

Hello,

 

I wonder if anyone try to install "new" A8-7680 into the HP Elitedesk Mini 705 g1? Is it possible? My stock dual core APU is very slow, and PRO versions of APU are not available anywhere near. 

 

Nvidia Tesla K20Xm z820

$
0
0

Not sure how to do this sorry I’m a nubbie

my specs is 48Gb 1333Mhz DDR3 ECC Ram

dual Xeon E5-5620 V0

gtx 680 4Gb

Tesla K20Xm 6Gb server gpu

 

What is this GPU to be used for?

I was going to use it mining bitcoin which requires the cuda portion of the gpu

 

I'm assuming you have the actively cooled version- with blower-style fan. The passively cooled one will absolutely not work as it requires a server-level air flow -80cfm? to cool it.

i have put a second gtx 680 PNY  enthusiast edition shroud on it with fan connections modified to work on the Tesla!

 

I've never used a K20X, but I'm reasonably sure the K20X should be in the primary GPU slot- and set as the primary in BIOS and then you'll need a Quadro with display output in the secondary slot. Certainly find the installation manual

 

However, in my view, the K20X is not a strong compute accelerator for use today.  It has 5GB of GDDR5, 2,496, and a healthy 320-bit bandwidth, but it runs at only 760MHz clock speed ( a modern  GTX will be 1800+) is PCIe2.0 and 225W-  and will run quite hot. Actually I think the 5GB is a bit low.

its actually 6Gb

 

Here's an idea that a bit eccentric and might not suit your needs, but consider a used AMD Vega Frontier Edition.  That has 16GB of HMB2 low latency RAM 4,096 shader units and can run the Radeon Pro driver = the AMD counterpart to Quadro.  These were $1,100 new and now only $400 or so. They can use an enormous mount of power they;re rated at 300W but can peak at to to 425 at the extreme, -but the z820 does have a sufficient power supply.  I think this might need a strong supplemental fan arrangement too.

 

I'd been thinking of trying a Vega Frontier, but have instead decided to buy a Quadro RTX 4000 as I think it will be better in 3D modeling and the RTX aspect suits my use of VRay. If you're CPU/GPU raytracing renderings there's always RTX.

 

to expensive right now I had to part out with my mining rig which had 6 gpus in total. 2 gtx 1080, 1 gtx 1070 , amd rx 480 8Gb, rx 580 8Gb, and a Vega 64 to get the z820 just because I had a a failing hdd and couldn’t mine anymore

 

Another thought is to emulate the z620 configuration of our Forum friend Brian1065 who runs a Quadro P2000 and water cooled GTX 1080ti which for animation rendering.

 

In any event, it seems some further research is advisable. GPU's have become more specialized - it's rare to find one that can do everything.  The Vega Frontier and the Titan Xp were attempts to do that however.

 

i can however run the Tesla with the gtx 680 but I can only install the Tesla 311.36 driver force windows 7 64-bit and the Tesla works with the z820 but any other driver won’t work even on Windows 10, tried but with no luck.

HP Z440 Worksation with HP P420 Smart RAID Controller - Hangs on BOOT after upgrading to latest BIOS

$
0
0

Hello everybody

I got an HP Z440 which was on Bios ver. 01.55 (23Apr2015) with a P420 Smart Controller.

PC was running Ok . - Boots from SSD on SATA and uses RAID as storage

Yesterday I upgraded BIOS to latest version v2.48 (11April2019)  and when PC is booting  initializes Smart Controller and then hangs.

Taken out the P420 Smart Controller and system runs fine 

A couple of questions

a) Any idea what is causing this problem ?

b) Is it possible to downgrade BIOS back to v1.55 or similar so I can get my system working with the P420 ??

c) If it is where can I get the .bin file (M60_0155.bin) in order to do the downgrade. I have searched on the previous versions Tab on the relevant page but it goes as far v2.32.

Thank you all for your time and effort to read and contribute

George

Windows 10 IOT loses focus of Virtual desktop when switching main monitor

$
0
0

Hello Everyone,

 

Our organization is in the final step of deploying Thin Clients. We are however running into a strange problem that occurs with multiple monitor setups.

 

On a T630 running the HP version of Windows 10 IoT:

When connecting to a Citrix session, the session is displayed full screen and function keys like alt+tab switch between the applications running in the virtual session. Pressing the Windows key opens the start menu in the virtual session.

 

The above is expected and wanted behavior. The issue only happens when the "Main Display" is switched in Windows directly or through Easyshell (see attachment at the bottom).

 

In this situation, when you use alt+tab you switch between the virtual session and the Easyshell. The windows key does nothing. It seems like the focus is not in the virtual session anymore but on the underlying Thin client.

IMG_8601.JPG 

 

 

Switch the main monitor back again, and everything works as normal .

Is this something that happens with your setups? It is really weird behavior and i am not really sure how to troubleshoot it.

 

Tested with Citrixweb 14.12.00  and also CitrixApp 19.5.0.26.

As logon menu i tried multiple versions of imprivata and our inhouse programmed menu.

I also had Easyshell uninstalled completely.

 

The two displays used are of the same type and have the same resolution. Both connected with Display port.

 

 

hp.png

 

Best recovery practice

$
0
0

I have a Z400 with mirrored  512 drives . Recently I did a Microsoft update and as a result have had a spinning circle on the desktop for days. Now is time to figure out the best repair solution. I have tried booting on a repair USB with no luck. I get to repairing  system then I am back the spinning circle.

1) can I break the Mirror and remount a drive with  the normal sata cable

2) in tat case I might be able reboot in safe mode and fix

 

If I can not fix and need to reinstall the OS how can I get the Serial number to install windows 10 and will plugging the now  no longer bookable drive as a second sata make it readable?

 

AMD Graphics driver for windows 10 Build 1903

$
0
0

Hello,

i recently tried to refresh my notebook with a clean installation of windows 10 build 1903.

 

Almost done. The only thing missing is the graphics driver.  Everytime i try to install a driver i get a black screen.

I tried HP drivers, ALL. Also AMD Catalyst or adrenalin. And finally also the Windows update tries to download the drivers but false everytime with black screen. Removed driver several times with ddu. Nothing works. I also copied the driver from my rcent build 1809 with double driver.

Google says there will be comoatible drivers for build 1903. 

Can anybody help? Thanks!


Re: Windows 7 - 32 bit installation

$
0
0

Hi Paul. Thank you for this observation. Very helpful. But I was wondering if it would be possible to install a windows xp on this hp 290 system? 

About your one product

$
0
0

I want to purchase this product but I am finding it any were in your site. Is this product is still available & if not please suggest me a second one with in same range. Please help ASAP. 

F Panel Pin Diagram for DX2400

$
0
0

I'd be very grateful for a diagram or manual that shows the pin functions for the F Panel  9 pin connector for the HP 459163-002 DX2400 LGA 775 Socket T. I looked for hours and simply can't find this simple information and I'd really appreciate your help. I upgraded from an older board with AGP and the tower does not have the preformed connector - it has 3 or 4 dual pin connectors one for power, reset, HDD ... Thanks very much in advance. I'll add an image of the board.

s-l1600.jpg

F Panel Pin Diagram for DX2400 SOLVED

$
0
0

SOLVED I'd be very grateful for a diagram or manual that shows the pin functions for the F Panel  9 pin connector for the HP 459163-002 DX2400 LGA 775 Socket T. I looked for hours and simply can't find this simple information and I'd really appreciate your help. I upgraded from an older board with AGP and the tower does not have the preformed connector - it has 3 or 4 dual pin connectors one for power, reset, HDD ... Thanks very much in advance. I'll add an image of the board.

s-l1600.jpg

Looking to buy the right replacement charger for an HP Pavilion Model 14-Ce0023nf

$
0
0

Hi,

I need to buy a replacement charger for my HP Pavilion 14-Ce0023nf as I forgot the original charger at my holiday home. 

 

I'm seeing that the input is 19.5volt but I can't see any specifications about the output nor the connector size to make sure I get the right one. My laptop is already out of battery so the only info I have access to is the one written at the back of my laptop...

 

Many thanks in advance for your help!

Viewing all 10205 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>