Fitting 2 RTX 2070 in my HP Z820
Hello Community! Does anyone have any experience of if I'm able to fit two RTX 2070 triple fan (Gigabyte GeForce RTX 2070 Windforce 8GB) in an hp z820? Thanks in advance!
View Articlei can't install my intern card reader on my workstation HP XW4600
i can't install my intern card reader on my workstation HP XW4600
View ArticleRunning Quad NVMe Adapter with Z820 Workstation
I currently have a Z820 Workstation (Gen 1), and I would like to add four M2 cards to my workstation in the PCIe 3.0 x16 slot using a Quad NVme adapter. To be installed like this:Slot 1: 512GB samsung...
View ArticleZ600 PCB FAB Rev 1.01
Hello,Just wanted to know if a Z600 Motherboard with ... PCB FAB Rev 1.01Is the C2 version with the boot block date of 01/07/10 I have asked the seller to have a look in the bios to find out for me for...
View ArticleNon RAID Win 7, no boot
Hello I am trying to convert a POS (RP 5800) workstation into a straight PC using just one SATA HDD, I installed WIN 7 32 bit (tryied also 64 bit) but it wont boot. The HDD is not coming form a RAID...
View ArticleZ820 : new W10 install : error with SAS controller (and doesn't see...
Hello, I have a new HP Z820 Workstation which I have upgraded to Windows 10 Pro (version 1809).The BIOS sees the CD/DVD-drive, but Windows doesn't and shows an "!"-symbol in the DeviceManager at "Other...
View ArticleUEFI setup hang with HP Elitedesk 800 G4 USB-C Alt Mode connected to USB-C...
I had a HP Elitedesk 800 G4 which have USB-C Alt Mode config and connected to USB-C monitor, but once I try to enter UEFI config page, the system hangs.Also the system not accept Function key during...
View ArticleHP Z Turbo Drive “G1” Questions
I’m looking to upgrade the SSD boot drive in my Z620 (V2 motherboard, full specs below). I am considering a HP Z Turbo Drive (512 GB or 1 TB). Luckily I did some reading on these forums before...
View ArticleClik here to view.
Zx20 workstations: Inferior USB 3.0 performance for the Texas Instruments...
The Z420/Z620/Z802 use a Texas Instruments HP USB 3.0 / USB 3.1 (gen 1) card that's based on the TI xHCi controller. On my Z420/Z620 machines, the top speed I get across the built in Texas...
View ArticleZ440 workstation bios password
Hello, i need a bios password to access bios options? I have tried jumper settings as stated in the service manual and also removing the battery, nothing!! After 3 wrong attempts it says locked out...
View ArticleШум вентиялтора в спящем режиме
Добрый день, в компании появилась проблема, что у некоторых ПК модели HP EliteOne 800 G1 AiO в режиме блокировки(сна) начинает изредка жужжать и кратковременно разгоняться основной вентилятор. При...
View ArticleUpgrade z800 with x5690 cpu
Hello! I want to replace 2xX5650 with 2xX5690 on mine z800. Power Supply: 850W. I have max power consumption around 700w now. Will i have any problems?
View ArticleRAID 1 logical and physical drive failed
Hello All,Over the weekend my HP Proliant DL380 G9 server with 2008 R2 OS was down with "No bootable devices were detected, Please attach a UEFI bootable device".Server OS drive was configured as RAID...
View ArticleInstallation Windows 10 on Z4 G4
We have bought an HP Z4 with a M2 harddisk (product type 5JA29EA). Windows 10 is preinstalled but I would like to be able to install Windows from our MDT / WDS environment or, in worst case, from DVD....
View ArticleHP Thunderbolt Dock G2, 230W [Kombinationskabel]
Hallo, ich möchte gerne wissen: HP Thunderbolt-Dockingstation G2 mit KombinationskabelWie viel spanung hat der buchse stecker vom kombikabel?Wie viel ampere kann der buchse stecker vom Kombikabel...
View ArticleUpgrade NVIDIA Quadro P1000 drivers and software
Hello,When I check system info, I see that NVIDIA adapter type says NVIDIA compatible. I see no evidence of any nvidia drivers or software being installed. Also, the renderer on one of the graphic...
View ArticleCompatability issue regarding the AMD Athlon X4 845 CPU
I have been attempting to upgrade the CPU on my HP EliteDesk 705 G1. Unfortunately, the machine becomes unresponsive when I place the new CPU. The CPU in question is: AMD Athlon X4 845 The slot is an...
View Article3.4 beeps in all in one business pc
The system board displays a power failure (crowbar).* 3.4 beeps.replaced the new motherboard still facing same issue.same issue found in 6 nos pall in one pc
View ArticleOnly one display port works on the HP Z2 Mini G4 Workstation
I can only get one of the display ports on a brand new Z2 mini to work. The machine has three Display port outputs, but only the monitor connected to the lower port is working.There are two equal...
View Article