Hi all,
Last week I tried to install new SSD disk. And it doesn't detect by the system. so i tried to unplugged VGA card and existing HDD about 6-10 times. Still not working. So i tried to change the BIOS setting of the PCI setting and enable "compute" in all slot. After reboot, PC can't boot up and beep 6 times. According to the manual, it is because of the VGA card issue. So I reset the BIOS setting by removing battery, and pressing CMOS button. But it not working. Then I remove the jumper which is beside the CMOS button to "Crisis recovery jumper". After power up, it beep 8 times and come up with BootBlock Emergency recovery mode and show that System BIOS image is corrupted.
I make system BIOS image with CD and flash the ROM. according to the screen, look like flashing the ROM is successful.
After unplugged the power and wait about 10 second, plug back the power cable and power on the pc. it still showing System BIOS image is corrupted. I tried both 7G4_0361.BIN and 7G4_0360.BIN but the result are the same. It keep looping.
is there any way to fix my issue?
Thanks in advance.