Hello,
i have a Z600 Workstation. newest (3.61) BIOS.
2 X5650 Xeon CPU´s and 48GB of total RAM
The Workstation works fine. but when i put my LSI 9270 Raid Controller in it.
I become a bootfailure that the RAM in slot 1 CPU 1 is incorrect.
I tried all diffent BIOS setting. i also tried to dissable the Option ROM from the RAID.
then the controller shows not at boot up but the failure is still there.
I tried diffent FW Packages of the Controller from LSI/Broadcom.
The Controller works also fine.
When i pull out the Controller, the RAM Failure is gne and all 48GB works fine.
Has someone a Idea?
Regards from Germany