Looking for a bit of assistance regarding "low-profile" power supplies that fit an HP Slimline 450-a120 desktop case, which appears to be no more than a 'low-profile' case that can accommodate a mini-ITX motherboard..
Yes, I am aware that the original power supply for the 450-a120 is/was a 19 volt 3.33A 'external' power supply (similar to that used by an HP laptop), but since the origiinal motherboard is now "toast", my current intent is to "re-purpose" this small case for a min-ITX motherboard that is intended to record video from three security cameras under a Linux OS.
So, all I really need is to know what is the proper 'form factor' the power supply must be to properly fit this small case.
I see that in the case 'floor', that there are provisions to accommodate a min-ITX motherboard, as well as a location and provision for a 'discrete', "low-profile" power supply - which is what I inted to use once I determine what that SHOULD be.
Can anyone indicate to me what potential power supplies HP may have used for other HP desktop models that were also in a SFF case like this, so I can locate an adequate P/S? OR ... possibly someone might know if there is an HP P/N for this case so I could research replacment power supplies?