I have a few Z600 and one of them needs an SSD upgrade. I used it every day and now have an even greater need for it. Currenly the Z600 is running of the internal RAID 1 with two 2 TB drives and is partitioned with a WIN 10 OS (200GB) and the rest storage. I have remote images of the OS that I created using Windows backup/restore The "rest" is backed up to a Synology NAS.
I have swapped out 6 computers with SSDs and it all went as expected, 4 laptops and 2 desktops. (mostly Dell computers) I use EASEUS TODO to create the image. Thus, hooked up the SSD to a SATA port inside the Z600 and let TODO to do the cloning. It says it is doing it succesfully. Windows Explorer show that all of it is there.
I then reboot and go into the BIOS and set the SSD as the first to boot from and it will not do it but skip down and get the OS from the Simulated SATA (RAID drives)
At this point I need this computer and not interested to corrupt the RAID, lose OS etc etc.
Any help is much appreciated from those that have similar setups.
Thank you.