We are using HP Device Manager 4.7 SP7 to control our 400 HP T630 thin clients. Everything is going wel except for automatic Bios updates. Our HP T630 thin clients are running M40_0102 and I want to upgrade them to M40_0103.
The OS on the T630 is Win10 IoT-64bit from the HP site. (release from 03-23-2017)
With HPDM I copy HPBIOSUPDREC64.exe and the Bios file M40_0103.bin to C:\temp
Then i run the command C:\temp\HPBIOSUPDREC64.exe -s -fm40_0103.bin
The update will not run and the logging says the following;
2017/07/26 10:12:32.631|000015C4|Information|CHPBiosUpdateApp::InitializeProperties|******************************************************************
2017/07/26 10:12:32.631|000015C4|Information|CHPBiosUpdateApp::InitializeProperties|** Start of HPBIOSUPDREC session, version 1.1.22.1 **
2017/07/26 10:12:32.647|000015C4|Information|CHPBiosUpdateApp::InitializeProperties|******************************************************************
2017/07/26 10:12:32.647|000015C4|Information|CHPBiosUpdateApp::InitializeProperties|Command line: -s -fM40_0103.bin
2017/07/26 10:12:32.663|000015C4|Information|CHPBiosUpdateApp::InitializeProperties|DASL PnP ID NOT found
2017/07/26 10:12:32.725|000015C4|Information|HPBiosUpdate:
mbiosInfo::GetSmbiosInfo|Getting SMBIOS information
2017/07/26 10:12:32.725|000015C4|Information|HPBiosUpdate:mbiosInfo::GetSmbiosInfo|Successfully retrieved SMBIOS settings: BIOS Family = M40, version = 05.11
2017/07/26 10:12:32.741|000015C4|Information|HPBiosUpdate:mbiosInfo::GetSmbiosInfo|PCID: ' ', AT-p supported: no, portable: yes
2017/07/26 10:12:32.819|000015C4|Information|HPBiosUpdate:
rivateWmiInfo::GetPrivateWmiSettings|Successfully retrieved Private WMI settings
2017/07/26 10:12:32.835|000015C4|Information|HPBiosUpdate:rivateWmiInfo::GetPrivateWmiSettings|m_isEfiUpdateSupported = 1, m_isEspDriveSupported = 0, m_isEncryptionSupported = 0
2017/07/26 10:12:32.835|000015C4|Information|HPBiosUpdate:rivateWmiInfo::GetPrivateWmiSettings|m_isBiosUpdateSet = 0, m_isUefiToolsRequired = 1
2017/07/26 10:12:34.555|000015C4|Information|HPBiosUpdate:ublicWmiInfo::CheckWmiSettingSetupLogIn|Setup Password is NOT set.
2017/07/26 10:12:36.601|000015C4|Information|HPBiosUpdate:ublicWmiInfo::GetBiosSettingValue|Setting not found: Lock BIOS Version
2017/07/26 10:12:37.742|000015C4|Information|HPBiosUpdate:ublicWmiInfo::GetBiosSettingValue|Setting not found: Update Base Embedded Controller Firmware
2017/07/26 10:12:37.757|000015C4|Information|HPBiosUpdate:ublicWmiInfo::GetPublicWmiSettings|Successfully retrieved Public WMI settings
2017/07/26 10:12:37.773|000015C4|Information|HPBiosUpdate::CabFile:arseUpdateName|Processing image filename 'M40_0103.bin'.
2017/07/26 10:12:37.788|000015C4|Information|CHPBiosUpdateApp::InitInstance|Update BIOS Family = M40, version = 01.03
2017/07/26 10:12:37.788|000015C4|Error |CHPBiosUpdateApp:erformSilentFlash|Always flash flag '-a' not found, update will not be performed.
2017/07/26 10:12:37.804|000015C4|Information|CHPBiosUpdateApp::ExitInstance|HPBIOSUPDREC Return Code = 273
2017/07/26 10:12:37.820|000015C4|Information|CHPBiosUpdateApp::ExitInstance|****************** End of HPBIOSUPDREC session ******************
2017/07/26 10:12:37.835|000015C4|Information|CHPBiosUpdateApp::ExitInstance|
I thought I whas missing the -a command and went on with the following command;
C:\temp\HPBIOSUPDREC64.exe -s -fm40_0103.bin -a
Only to see a new error;
2017/07/26 10:13:19.100|00001744|Information|CHPBiosUpdateApp::InitializeProperties|******************************************************************
2017/07/26 10:13:19.100|00001744|Information|CHPBiosUpdateApp::InitializeProperties|** Start of HPBIOSUPDREC session, version 1.1.22.1 **
2017/07/26 10:13:19.115|00001744|Information|CHPBiosUpdateApp::InitializeProperties|******************************************************************
2017/07/26 10:13:19.115|00001744|Information|CHPBiosUpdateApp::InitializeProperties|Command line: -s -fM40_0103.bin -a
2017/07/26 10:13:19.131|00001744|Information|CHPBiosUpdateApp::InitializeProperties|DASL PnP ID NOT found
2017/07/26 10:13:19.162|00001744|Information|HPBiosUpdate:mbiosInfo::GetSmbiosInfo|Getting SMBIOS information
2017/07/26 10:13:19.178|00001744|Information|HPBiosUpdate:mbiosInfo::GetSmbiosInfo|Successfully retrieved SMBIOS settings: BIOS Family = M40, version = 05.11
2017/07/26 10:13:19.178|00001744|Information|HPBiosUpdate:mbiosInfo::GetSmbiosInfo|PCID: ' ', AT-p supported: no, portable: yes
2017/07/26 10:13:19.240|00001744|Information|HPBiosUpdate:rivateWmiInfo::GetPrivateWmiSettings|Successfully retrieved Private WMI settings
2017/07/26 10:13:19.256|00001744|Information|HPBiosUpdate:rivateWmiInfo::GetPrivateWmiSettings|m_isEfiUpdateSupported = 1, m_isEspDriveSupported = 0, m_isEncryptionSupported = 0
2017/07/26 10:13:19.256|00001744|Information|HPBiosUpdate:rivateWmiInfo::GetPrivateWmiSettings|m_isBiosUpdateSet = 0, m_isUefiToolsRequired = 1
2017/07/26 10:13:19.431|00001744|Information|HPBiosUpdate:ublicWmiInfo::CheckWmiSettingSetupLogIn|Setup Password is NOT set.
2017/07/26 10:13:21.460|00001744|Information|HPBiosUpdate:ublicWmiInfo::GetBiosSettingValue|Setting not found: Lock BIOS Version
2017/07/26 10:13:22.589|00001744|Information|HPBiosUpdate:ublicWmiInfo::GetBiosSettingValue|Setting not found: Update Base Embedded Controller Firmware
2017/07/26 10:13:22.600|00001744|Information|HPBiosUpdate:ublicWmiInfo::GetPublicWmiSettings|Successfully retrieved Public WMI settings
2017/07/26 10:13:22.616|00001744|Information|HPBiosUpdate::CabFile:arseUpdateName|Processing image filename 'M40_0103.bin'.
2017/07/26 10:13:22.616|00001744|Information|CHPBiosUpdateApp::InitInstance|Update BIOS Family = M40, version = 01.03
2017/07/26 10:13:22.866|00001744|Information|HPBiosUpdate:artition::FindHp_ToolsPartition|No HP_TOOLS partition found.
2017/07/26 10:13:22.882|00001744|Warning |CHPBiosUpdateApp:repareEfiFlash|No BIOS recovery partition was found.
2017/07/26 10:13:22.882|00001744|Information|CHPBiosUpdateApp:erformSilentFlash|EFI flash is not supported, will attempt WMI flash.
2017/07/26 10:13:22.913|00001744|Error |HPBiosUpdate::WmiFlash::QueryFlashROM|WMI method to Query Flash Rom failed, hr = 0x00000000, return Code = 0x3
2017/07/26 10:13:22.929|00001744|Information|CHPBiosUpdateApp::ExitInstance|HPBIOSUPDREC Return Code = 3010
2017/07/26 10:13:22.929|00001744|Information|HPBiosUpdate::RestartSystem|************* End of HPBIOSUPDREC session - restarting *************
2017/07/26 10:13:22.944|00001744|Information|HPBiosUpdate::RestartSystem|
It says something about the flash method I cant figure out.
2017/07/26 10:13:22.882|00001744|Information|CHPBiosUpdateApp:erformSilentFlash|EFI flash is not supported, will attempt WMI flash.
2017/07/26 10:13:22.913|00001744|Error |HPBiosUpdate::WmiFlash::QueryFlashROM|WMI method to Query Flash Rom failed, hr = 0x00000000, return Code = 0x3
Hopefully someone can put me in the right direction to resolve this issue.